#------------------------------------------------------------------------------
# VINN NOTLARI
#------------------------------------------------------------------------------
Debian Jessie ve Raspbian ile test edilmiştir.

#------------------------------------------------------------------------------
# Huawei HiLink (ethernet mode)
#------------------------------------------------------------------------------
# packages
apt-get install usb-modeswitch

# lsusb (before switch)
12d1:1f01 Huawei Technologies Co., Ltd.

# lsusb (after switch)
12d1:14db Huawei Technologies Co., Ltd.

# test run
usb_modeswitch -v 12d1 -p 1f01 -V 12d1 -P 14db -M \
    "55534243123456780000000000000a11062000000000000100000000000000"

# /etc/usb_modeswitch.d/vinn_huawei_hilink.conf
DefaultVendor= 0x12d1
DefaultProduct= 0x1f01
TargetVendor= 0x12d1
TargetProduct= 0x14db
MessageEndPoint = "0x01"
MessageContent="55534243123456780000000000000a11062000000000000100000000000000"
NoDriverLoading=1

# /etc/udev/rules.d/90-usb-modeswitch.rules
ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1f01", RUN+="/usr/sbin/usb_modeswitch -c /etc/usb_modeswitch.d/vinn_huawei_hilink.conf"

# restart udev
systemctl restart udev.service

# ifconfig
eth1      Link encap:Ethernet  HWaddr 58:2c:80:71:47:58
          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0

#------------------------------------------------------------------------------
# Huawei HiLink (modem mode)
#------------------------------------------------------------------------------
# packages
apt-get install minicom wvdial

# switch to modem mode
http://192.168.1.1/html/switchProjectMode.html

# fix the modem mode
minicom -D /dev/ttyUSB0 -b 9600 -8 -z
>>> AT^U2DIAG=0
<<< OK

<ctrl>+a z x

# return to ethernet mode
minicom -D /dev/ttyUSB0 -b 9600 -8 -z
>>> AT^U2DIAG=119
<<< OK

<ctrl>+a z x

# reconnect
disconnect & connect device

# device
ls /dev/ttyUSB*
<<< /dev/ttyUSB0  /dev/ttyUSB1 /dev/ttyUSB2
lsusb
<<< 12d1:1442 Huawei Technologies Co., Ltd.

# /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 = AT+CGDCONT=1, "IP", "internet"
Modem = /dev/ttyUSB0
Modem Type = Analog Modem
Baud = 460800
ISDN = 0
New PPPD = yes
Phone = *99#
Username = vodafone
Password = vodafone
Stupid Mode = 1
Dial Command = ATD
Carrier Check = no
Auto DNS = 0

# dial up
wvdial